A Wireless Indoor Sensor Internet Gateway is required to connect indoor sensors to your internet connection. It is responsible for obtaining the data from each monitor and uploading the data to the internet. Up to 20 monitors can share the same gateway. Each monitor must be within range of another monitor or the gateway. Together they form a wireless network to transport the data to the internet.

Requirements

• Internet service over Ethernet
• Each indoor monitor must be located within range of either a coordinator or another monitor. For installations in buildings with many walls, the maximum range between two units can be as low as 300 ft. The exact distance needed depends upon the building construction and contents. When a clear line of site between two monitors exists, the range of communication can be significantly longer. For example, if a coordinator was installed in the window on the 6th floor of one building and a monitor was installed in a similar fashion in another building, the monitors could be as far as 0.5 miles apart. Please contact us if you have questions regarding your application.